Fast, Reliable Bathroom Remodeling Across Palm Springs
A bathroom remodel in Palm Springs costs between $18,000 and $65,000 for most projects, with full gut-and-rebuild work on mid-century homes typically landing in the upper half of that range. We work across the Coachella Valley’s wind-exposure zone, so our quotes include the rated windows, flashing, and roof-penetration venting that Palm Springs inspectors actually check. Call (866) 730-4828 for a free estimate, and we’ll walk the job before you commit to anything.
Why Bungalow ADU Builders Is Palm Springs’s Preferred Bathroom Remodeling Company
We’re not a Palm Springs design-build firm that moonlights in bathrooms. We’re Bathroom Remodeling specialists who got our start on ADUs, which means we think about a bath the way a building inspector does: as part of an envelope that has to hold up to 110°F heat, monsoon gusts, and wind-blown sand. That changes everything about how we scope a job in Palm Springs.
Our team is led by Nate Calloway, and the difference shows up in the details. We know the 92262, 92263, 92264, and 92292 neighborhoods well enough to predict what’s behind a 1960s stucco wall before we open it. When we quote a hall bath on a Racquet Club Road original, we’re already accounting for the concrete slab, the flat-roof venting, and the wind-load rated window assembly that code requires, not hoping we get lucky at inspection.
Palm Springs homeowners call us because the estimate we give is the job we do. No change orders for code compliance we should have seen coming. That’s the whole point of local expertise.
Our Bathroom Remodeling Services in Palm Springs
Full Gut and Re-Tile
Most Palm Springs baths we open up are original to the house: cast iron tubs, 1960s tile on mud-set mortar, galvanized supply lines that have been corroding for fifty years. A full gut lets us replace the rough-in plumbing, level the slab or subfloor, and rebuild with waterproofing that meets current code. We’ve done dozens of these on the Alexander tracts and in Deepwell, and the before-and-after is usually the difference between a dated guest bath and the most-used room in the house.

Window and Bump-Out Envelope Upgrades
When a Palm Springs homeowner adds a window or bumps out a wall for a double vanity, that’s an exterior-envelope change, not just an interior one. The new opening has to be flashed and sealed against wind-driven sand and monsoon rains, and the window itself carries a wind-load rating for the Coachella Valley’s exposure zone. We spec the rated assembly, tape the flashing, and tie the rough opening to the existing structure so the inspector signs off the first time.

Exhaust and Roof-Penetration Venting
Flat and low-slope roofs are the default in Palm Springs, and a bath exhaust fan that dumps into an old soffit or straight into the roof cavity is a slow-moving problem: hot attic air, moisture, and eventually rot or mold. We re-route exhaust through a curbed roof penetration with a proper membrane boot. It’s a small detail that keeps 110°F attic air out of the bathroom and keeps the inspector happy. Most remodelers skip it because it’s invisible on demo day. We don’t, because we’ve seen what happens when it’s skipped.

Vanity, Plumbing, and Tile Refresh (No Structural Changes)
Not every Palm Springs bath needs to be gutted. If the layout works and the rough-in plumbing is solid, we replace vanities, counters, tile, and trim, and we bring the electrical up to code with GFCI protection. This is the most budget-friendly option, and it’s common for homeowners prepping a guest bath before selling. We’ll tell you honestly whether a refresh is enough, or whether the subfloor or plumbing is telling us it’s time to open it up.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Palm Springs
We work with fixtures and materials that hold up in the desert. That includes James Hardie siding and trim where an exterior wall is involved, and we’re brand-agnostic on the fixtures themselves, so the choice is yours. On ADU and casita bathroom projects in Palm Springs, we also source from Abodu and Tuff Shed systems when the project calls for a prefab shell, then finish the interior bath to match the main house. Our familiarity with these brands means we’re not learning on your job.
Common Bathroom Remodeling Problems We See in Palm Springs Homes
- Exhaust vented into the flat-roof assembly or old soffit. This is the most common issue in Palm Springs mid-century homes. It pumps hot attic air and monsoon moisture right back into the bath, and it fails inspection. The fix is a curbed roof penetration with a membrane boot, done correctly the first time.
- Hairline stucco cracks over old, unprepared block. After a shower-valve relocation or window replacement, patching stucco over dirty or unkeyed block leaves a crack that UV and wind-blown sand open into a leak path before the next gully-washer. Proper prep and a full scratch-and-brown coat prevent it.
- Rated window assemblies skipped on new openings. A cheap quote will install a standard window in a bump-out and hope the inspector doesn’t check the wind-load rating. In Palm Springs, they check. The redo costs more than the rated unit would have in the first place.
- Rusting galvanized supply lines and slab-concealed leaks. Fifty-year-old Palm Springs homes often hide failing steel pipe under concrete slab. If we’re re-routing or replacing, we pressure-test before tile goes up. Finding a slab leak after the fact is a five-figure surprise.
Pricing for Bathroom Remodeling in Palm Springs, CA
Here are the ranges we actually quote for Palm Springs work, updated for the 2026 market:
- Cosmetic refresh (vanity, mirror, light fixture, paint, trim, re-caulk): $4,000 – $9,000
- Full gut and rebuild of a standard 5×8 hall bath, mid-range finishes, code-compliant venting and waterproofing: $18,000 – $32,000
- Primary bath remodel with layout change, walk-in shower, double vanity, and new window or bump-out: $35,000 – $65,000
- Window or bump-out envelope upgrade alone (rated assembly, flashing, tie-in, stucco patch): $2,500 – $7,000 depending on opening size and wall condition
- Exhaust re-route through a flat roof with curb and membrane boot: $1,200 – $2,800
What moves the number is the wall condition behind the tile, the slab or subfloor under the tub, whether the existing plumbing is copper or galvanized, and whether the project touches an exterior wall. A compliant quote includes the rated window, the taped flashing, the curbed roof vent, and the permit. A cheap quote leaves them out, which is why it’s cheap and why it stalls at inspection. Call (866) 730-4828 and we’ll walk the job with you. Free.
We Also Serve Cities Near Palm Springs
Beyond Palm Springs proper, we run bathroom remodels in Cathedral City, Rancho Mirage, Garnet, and Desert Hot Springs. The wind-exposure and flat-roof conditions are the same Coachella Valley story, and the inspection expectations don’t change at the city line. If you’re in any of those areas, Bathroom Remodeling in Palm Springs pricing and scoping applies. Call us and we’ll confirm your street.
Serving Palm Springs, CA — Our Local Coverage Area
We’re based in the Palm Springs area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Bathroom Remodeling in Palm Springs
Yes, if you’re changing the shower valve, re-routing any water lines, or touching electrical, a permit is required in Palm Springs. A vanity and light-fixture swap with no plumbing movement is about the only exception. Call (866) 730-4828 and we’ll tell you what your exact scope needs before you sign anything.
Any new window in a Palm Springs bath is an exterior-envelope change, so it has to carry a wind-load rating for the Coachella Valley’s exposure zone, and the rough opening has to be flashed and taped against sand and monsoon-driven rain. Inspectors check both. A rated unit and proper flashing keep the window from becoming a leak path in the first season. We spec them as standard, not as an upgrade.
Through a curbed roof penetration with a proper membrane boot, not into the soffit or the roof cavity. That’s the code-compliant way and the only way that actually moves moisture out in 110°F summer heat. We re-route exhaust as part of every full remodel and most refreshes. If your current fan dumps into the attic, get it fixed before it ruins the ceiling. Call (866) 730-4828 for a look.
Yes. A permitted, inspected remodel with documented compliance means your insurer can’t deny a water-damage or wind-damage claim because the work wasn’t code-compliant. A skipped permit or a window without the rated assembly gives the adjuster an easy out. We pull permits and pass inspections on every job, and we hand you the paperwork at the end. That documentation is part of what you’re paying for.
Sometimes, and it depends on the main line’s depth and condition under the Palm Springs slab. If the existing drain line is deep enough and not root-bound or rusted, we can tie in. If it’s shallow or compromised, the ADU bath gets its own dedicated line. We assess this during the free estimate, before we quote a number, because guessing wrong on a slab tie-in is expensive. Call (866) 730-4828.
Ready to price your Palm Springs bath? Call (866) 730-4828 for a free, line-item estimate. Nate and the team will walk the job, check the envelope, and tell you what a compliant quote includes, no games.
Written by Nate Calloway, Owner at Bungalow ADU Builders, serving Palm Springs and the Coachella Valley.